Custom Paint Brush Holder (Closed) - Made to Order - (Holds up to 90 Brushes, Tools, Pencils, Pens, Marker, Pottery Tools, etc)
€80.00
**Check out the rest of my shop here** https://www.etsy.com/shop/pastelartadmiral
This made to order closed brush holder was designed and made by me at my home in Ireland. The holder comes fully assembled (absolutely no assembly required) and measures 298mm long, 105mm tall and 100mm deep or 11.5' x 4' x 4'.
The design features an 8mm teak hardwood shell and custom 3d printed black supports that hold the brushes, pencils, markers, tools, etc.
Each holder is divided into two sections, the back and the front, where each section has an array of holes that can be customised to your needs. The following hole sizes are available for you to choose from...
S - 45 holes, 7mm or 1/4 inch wide
(For thin delicate brushes)
M - 45 holes, 10.5mm or 3/8 inch wide
(For pencils, pens, medium brushes, some smaller tools, pottery tools, etc)
L - 24 holes, 17.5mm or 5/8 inch wide
(For larger brushes, markers, stumps, cutting tools, etc)
XL - 14 holes, rectangular holes 35mmx17mm or 1.3'x0.5'inches wide
(For palette knives, thick brushes and other larger implements, etc)
The holder would be perfect to hold you brush collection, your pottery tools, your pencils, markers and anything else
This made to order closed brush holder was designed and made by me at my home in Ireland. The holder comes fully assembled (absolutely no assembly required) and measures 298mm long, 105mm tall and 100mm deep or 11.5' x 4' x 4'.
The design features an 8mm teak hardwood shell and custom 3d printed black supports that hold the brushes, pencils, markers, tools, etc.
Each holder is divided into two sections, the back and the front, where each section has an array of holes that can be customised to your needs. The following hole sizes are available for you to choose from...
S - 45 holes, 7mm or 1/4 inch wide
(For thin delicate brushes)
M - 45 holes, 10.5mm or 3/8 inch wide
(For pencils, pens, medium brushes, some smaller tools, pottery tools, etc)
L - 24 holes, 17.5mm or 5/8 inch wide
(For larger brushes, markers, stumps, cutting tools, etc)
XL - 14 holes, rectangular holes 35mmx17mm or 1.3'x0.5'inches wide
(For palette knives, thick brushes and other larger implements, etc)
The holder would be perfect to hold you brush collection, your pottery tools, your pencils, markers and anything else
Hole Sizes:
Wood Type:
Quantity:
**Check out the rest of my shop here** https://www.etsy.com/shop/pastelartadmiral
This made to order closed brush holder was designed and made by me at my home in Ireland. The holder comes fully assembled (absolutely no assembly required) and measures 298mm long, 105mm tall and 100mm deep or 11.5' x 4' x 4'.
The design features an 8mm teak hardwood shell and custom 3d printed black supports that hold the brushes, pencils, markers, tools, etc.
Each holder is divided into two sections, the back and the front, where each section has an array of holes that can be customised to your needs. The following hole sizes are available for you to choose from...
S - 45 holes, 7mm or 1/4 inch wide
(For thin delicate brushes)
M - 45 holes, 10.5mm or 3/8 inch wide
(For pencils, pens, medium brushes, some smaller tools, pottery tools, etc)
L - 24 holes, 17.5mm or 5/8 inch wide
(For larger brushes, markers, stumps, cutting tools, etc)
XL - 14 holes, rectangular holes 35mmx17mm or 1.3'x0.5'inches wide
(For palette knives, thick brushes and other larger implements, etc)
The holder would be perfect to hold you brush collection, your pottery tools, your pencils, markers and anything else
This made to order closed brush holder was designed and made by me at my home in Ireland. The holder comes fully assembled (absolutely no assembly required) and measures 298mm long, 105mm tall and 100mm deep or 11.5' x 4' x 4'.
The design features an 8mm teak hardwood shell and custom 3d printed black supports that hold the brushes, pencils, markers, tools, etc.
Each holder is divided into two sections, the back and the front, where each section has an array of holes that can be customised to your needs. The following hole sizes are available for you to choose from...
S - 45 holes, 7mm or 1/4 inch wide
(For thin delicate brushes)
M - 45 holes, 10.5mm or 3/8 inch wide
(For pencils, pens, medium brushes, some smaller tools, pottery tools, etc)
L - 24 holes, 17.5mm or 5/8 inch wide
(For larger brushes, markers, stumps, cutting tools, etc)
XL - 14 holes, rectangular holes 35mmx17mm or 1.3'x0.5'inches wide
(For palette knives, thick brushes and other larger implements, etc)
The holder would be perfect to hold you brush collection, your pottery tools, your pencils, markers and anything else
**Check out the rest of my shop here** https://www.etsy.com/shop/pastelartadmiral
This made to order closed brush holder was designed and made by me at my home in Ireland. The holder comes fully assembled (absolutely no assembly required) and measures 298mm long, 105mm tall and 100mm deep or 11.5' x 4' x 4'.
The design features an 8mm teak hardwood shell and custom 3d printed black supports that hold the brushes, pencils, markers, tools, etc.
Each holder is divided into two sections, the back and the front, where each section has an array of holes that can be customised to your needs. The following hole sizes are available for you to choose from...
S - 45 holes, 7mm or 1/4 inch wide
(For thin delicate brushes)
M - 45 holes, 10.5mm or 3/8 inch wide
(For pencils, pens, medium brushes, some smaller tools, pottery tools, etc)
L - 24 holes, 17.5mm or 5/8 inch wide
(For larger brushes, markers, stumps, cutting tools, etc)
XL - 14 holes, rectangular holes 35mmx17mm or 1.3'x0.5'inches wide
(For palette knives, thick brushes and other larger implements, etc)
The holder would be perfect to hold you brush collection, your pottery tools, your pencils, markers and anything else
This made to order closed brush holder was designed and made by me at my home in Ireland. The holder comes fully assembled (absolutely no assembly required) and measures 298mm long, 105mm tall and 100mm deep or 11.5' x 4' x 4'.
The design features an 8mm teak hardwood shell and custom 3d printed black supports that hold the brushes, pencils, markers, tools, etc.
Each holder is divided into two sections, the back and the front, where each section has an array of holes that can be customised to your needs. The following hole sizes are available for you to choose from...
S - 45 holes, 7mm or 1/4 inch wide
(For thin delicate brushes)
M - 45 holes, 10.5mm or 3/8 inch wide
(For pencils, pens, medium brushes, some smaller tools, pottery tools, etc)
L - 24 holes, 17.5mm or 5/8 inch wide
(For larger brushes, markers, stumps, cutting tools, etc)
XL - 14 holes, rectangular holes 35mmx17mm or 1.3'x0.5'inches wide
(For palette knives, thick brushes and other larger implements, etc)
The holder would be perfect to hold you brush collection, your pottery tools, your pencils, markers and anything else
